PX Range Product Manual Version 2.0 © Copyright Brainboxes Limited 2010 Page 32 of 37
8. Technical Specifications
8.1. Supported Serial Settings
Serial Setting
Baud Rate Up to 921,600
Data Bits 5,6,7 or 8
Parity None, Odd, Even, Mark & Space
Stop Bits 1, 1.5 or 2
Handshaking RTS/CTS DTR/DSR Xon/Xoff
Break Supported
8.2. Device Pin-out
8.2.1. RS232 Devices
8.2.2. RS422/485 Devices
PLEASE NOTE:
• DTR/DSR Handshaking is not available on RS422/485 devices
• For RS422 FULL Duplex Communications, please note the pin outs above.
• To achieve RS485 Half Duplex Communications, using two wires for communication, Pins 1 and 6,
2 and 7 must be physically shorted.
• Once your wiring is setup, you will also need to set the card to FULL or HALF Duplex mode in the
software. For further details, see Section 3.4: RS422/485 Settings
Regulatory Approvals / Compliance
For up to date details of global certifications, please check the product datasheet on the Brainboxes website.
Comments to this Manuals