Brainboxes PX-320 Manual download pdf (Page 6)

PX Range Product Manual Version 2.0 © Copyright Brainboxes Limited 2010 Page 6 of 37

2. Installation Instructions

PLEASE READ CAREFULLY

• For RS232 Cards, there are TWO Installation steps to installing the Boost.PCIe driver:

1. CARD driver

2. PORT driver

• For RS422/485 Cards, there are THREE Installation steps to installing the Boost.PCIe driver:

1. CARD driver

2. PORT driver

3. BASE SYSTEM DEVICE driver. This is the RS422/485 Controller

• Each step will take you through a full installation using the Found New Hardware wizard.

• Once the Card is installed, the Operating System will detect the COM Port. All you will need to do to

install the COM Port is to run through the same installation steps as the Card. This also applies to

the RS-422/485 Controller

• Follow the Operating System specific instructions below to start the installation procedure.

If you have any issues with installation, please follow the steps in Section 4: Uninstallation, then

attempt to install again. If you still have issues, see Section 6: Troubleshooting and Testing

1 2 3 4 5 6 7 8 9 10 11 ... 36 37

No comments

Brainboxes PX-320 Manual Page 6